Internal S-ATA cable, S-ATA 22-pin 90° male to 7-pin + 4-pin power connector, 0.50 m long

The internal SATA All-in-One cable connects a Serial ATA drive via a 90° angled SATA combo socket (7+15) simultaneously to the SATA data port on the motherboard or controller and to a 4-pin IDE/Molex power connector on the PC power supply. The data cable is approx. 0.50 m long, and the power cable is approx. 0.10 m long.

• Combined data and power connection for internal SATA drives
• 90° angled SATA combo connector for tight installation spaces
• Straight 7-pin SATA plug for connection to the motherboard or controller
• 4-pin IDE/Molex power connector for suitable PC power supplies
• Bulk version for system integration, servicing and mass production

The SATA All-in-One cable combines the data and power supply for a Serial ATA drive in a single connection design. On the system side, there is a straight 7-pin SATA plug for the data connection and a 4-pin IDE/Molex power plug for the power supply unit. On the drive side, both connections are combined via a 7+15 SATA combination socket.

The 90° angled combination connector enables space-saving cable routing directly at the drive and reduces the required bend radius. This is particularly relevant for compact cases, mounting frames and installations with limited space at the drive connection.

• System integration and assembly of PCs and industrial PCs
• Internal cabling of SATA HDDs, SSDs and optical drives
• Panel PCs and embedded systems
• Service, maintenance and retrofitting of existing drive cabling
• Test set-ups and workshop environments

• SATA drives with a 7+15-pin SATA combo connector, such as HDDs, SSDs or optical drives
• Motherboards and controllers with a 7-pin SATA data connector
• PC power supplies with a 4-pin IDE/Molex power connector

For angled connectors, the designation of the angle direction depends on the perspective from which it is viewed. The product illustration is therefore decisive for the installation direction of the 90° connector.

Before installation, the available installation space on the drive and the orientation of the 90° SATA combo connector should be checked against the product illustration.

For the system side, both a 7-pin SATA data connector on the motherboard or controller and a 4-pin IDE/Molex power connector on the power supply unit are required.

DINIC is a trademark of MAG GmbH – product and system accessories for professional installation and integration environments.