SAT aerial cable

SAT aerial cables with F connectors for TVs and set-top boxes

DINIC SAT coaxial cables with F-connectors (F-to-F) connect SAT sockets and receivers with matching F-sockets. Choose white or black connection cables from 1 to 10 m, depending on the series and model. Flat window feed-throughs and a SAT finder complete the range for specialist retailers, installation companies and service providers.

Quadruple-shielded, white

SAT cable with 120 dB shielding and gold-plated F-connectors, in a DINIC box.

Premium version, black

Black SAT connection cable with gold-plated F-connectors, for example in 2 m lengths.

Through the window without drilling

Ultra-flat SAT window feed-through with two F-sockets, 26 cm total length.

For extensions and alternative connection combinations, you’ll find suitable components in the SAT cable accessories range.

1 to 22 (from a total of 22)

Choosing a satellite cable: F-connector, length and shielding

To connect a satellite receiver or a television with a DVB-S/S2 tuner, you will usually need a coaxial cable with two F-connectors. Check the satellite input on the device and the satellite output on the connection socket. F-connections are screwed in; for plug-in IEC connectors, you will find separate TV/radio aerial cables.

Cable types Lengths and examples Features
White, DINIC box 1.5 / 2.5 / 3.5 / 5 / 7.5 / 10 m; e.g. 5 m or 10 m. 120 dB shielding rating, quadruple-shielded, gold-plated F-connectors.
Black, Premium 1 / 2 / 3 / 5 m; e.g. 2 m in the DINIC box or in the DINIC blister pack. Gold-plated F-connectors; compare cable construction and other features based on the selected item.
Black, Dubai Range with 120 dB specification 1 m or 3 m, DINIC blister pack. Shielding rating over 120 dB, gold-plated F-connectors.
White, DINIC polybag 1.5 m, 2.5 m or 5 m. Double-shielded, shielding rating over 75 dB, moulded connectors and nickel-plated contacts.
Weißes DINIC SAT-Koaxialkabel mit zwei vergoldeten F-Steckern

What do 120 dB and quadruple shielding mean?

The shielding rating describes the protection against electromagnetic interference and radiation. The white 120 dB cables in the DINIC box combine two foil shields and two braided shields.

Shielding attenuation and signal attenuation are different quantities: 120 dB does not indicate either an amplification or a corresponding loss of the useful signal. For a reliable connection, cable length, cable construction and the quality of the connectors are also important factors.

Weiße flache SAT-Fensterdurchführung mit F-Buchse auf F-Buchse

Routing a satellite cable through a window – without drilling

The window feed-through is a flat adapter with an F-socket to F-socket connection. A cable with an F-plug is connected to each end. The total length is 26 cm, with the flexible section measuring 17.5 cm.

Choose the version in the DINIC box or the DINIC polybag. Check the window rebate and route the flat section without sharp bends, tension or damage caused by the locking mechanism.

What length do I need – and can I extend a satellite cable?

Measure the actual cable route, including cable ducts and a small connection allowance. The white box versions are available up to 10 m. With the same cable type, signal attenuation increases with length; unnecessary cable loops and additional connectors can be avoided by using a suitable assembly.

Two cables with F-connectors can be joined using a suitable F-type double-socket connector. You will find suitable connectors in the SAT cable accessories section. For customised runs, coaxial cable is available on reels.

For permanent outdoor installation, the cable sheath and connectors must be specifically rated for weathering and UV exposure. An F-connector alone does not guarantee this suitability.

Do I need a special SAT cable for HD or 4K?

A satellite cable transmits the high-frequency reception signal to the tuner. Whether HD or UHD/4K content is displayed also depends on the broadcaster, the reception system and the end device. The key factors in choosing a cable are compatible connectors, suitable transmission characteristics and sufficient signal quality at the receiver.

The specification ‘24k gold-plated’ on certain connectors refers to the gold plating and not to image resolution.

DINIC Satelliten-Finder mit beleuchtetem LCD und Dämpfungsregler

Aligning the satellite dish and checking the signal level

The DINIC SAT Finder with digital signal level display assists with alignment via an illuminated LCD, an attenuation control and audible feedback. It is connected between the LNB and the receiver and powered via the receiver.

You should then check the signal quality and reception of the desired channels on the receiver.

Suitable components for the satellite installation

SAT connection cables for specialist retailers and project requirements

Please specify the length, colour, connector combination, shielding requirements and quantity. MAG will assist you in selecting suitable DINIC products. For product display and stock management, the packaging overview details the available packaging types.

Send a B2B enquiry to MAG