Power adaptors & mains adaptors
Connect different connectors, route cables to save space and make the most of existing power distribution systems: DINIC power adaptors and adaptor cables offer practical solutions for specialist retailers, system integrators, service providers and industry. Choose the right combination of plug type, connector and design for your application.
Do you need a longer cable or plugs for other countries? You’ll find suitable extension leads for IT equipment and international power adaptors here.
Power adaptors for IT, UPS and equipment connections
Which power adaptor is right for your application?
A passive power adapter connects compatible plug systems or changes the direction of the connection. It does not convert either voltage or frequency. The decisive factors are therefore both connections, the electrical rating and the available installation space. The following overview makes it easier to narrow down your choice.
| Application | Suitable model | What matters |
|---|---|---|
| Limited space behind equipment or in a rack | Angled adaptor C13 to C14 or C19 to C20 | Check the angle orientation against the product images to ensure it matches the actual installation position. |
| Connecting a grounded plug to a UPS or PDU | Connect a C14 plug to a grounded socket for C13 outputs; connect a C20 plug to a grounded socket for C19 outputs | Check the permissible load for the output, adapter and connected device. |
| Connecting small appliances or external power supplies | Use an adapter with C5, C6 or C7, depending on the connection combination | Distinguish between plug and socket; ensure the required earth conductor is present. |
| Creating more space for a Euro-plug power supply | Short extension lead with Euro plug and Euro socket | For suitable two-pin appliances; not a substitute for an earthed extension lead. |
Four points for making the right choice
- Determine both connection ends: Which socket is available at the power source and which connection is required on the appliance or cable? C13 fits C14, C19 fits C20 and C5 fits C6.
- Check the current rating: The lowest permissible current rating within the connection is the determining factor. A grounded socket on the adapter does not automatically mean that the entire connection can carry a load of 16 A.
- Check the design and space requirements: An angled adapter can align the cable outlet correctly. An adapter cable provides spacing between the connections. Also check neighbouring sockets and the space available for the cable.
- Take product data into account: Voltage, current, temperature range, protective earth conductor and, where applicable, cable cross-section must be suitable for the application. Test marks and approvals apply only to the specific version indicated.
Our guide to IEC C13, C15 and C19 provides further guidance.
Frequently asked questions about power adaptors
Which adapter do I need for a UPS with a C13 output?
For a device with a safety-earthed plug, an adapter with a C14 plug and a safety-earthed socket is suitable. The C14 plug is connected to the C13 output on the UPS. For a C19 output, the corresponding version with a C20 plug is intended. In addition to the adapter’s load capacity, please also take note of the specifications and the available power of the UPS.
What is the difference between a power adapter and a power supply unit?
Passive power adaptors provide a mechanical connection. A power supply unit, on the other hand, converts the input voltage into the output voltage required by the device. With the universal power supply unit also available in this category, the output voltage, polarity, plug size, available current and power must match the device’s requirements.
Can an angle adapter replace a different type of IEC connector?
An angle adapter primarily changes the direction of the connection. A C13-to-C14 adapter does not, therefore, become a C19/C20 connection, nor does it become a C15/C16 connection designed for higher temperatures. Always select the connection combination and temperature rating that are suitable for the device.
Add suitable cables and accessories
- Mains cables with earth-contacted or Euro plugs to ensure the device is fully connected.
- International power cables for equipment and projects requiring country-specific mains plugs.
- Power strips for distributing power to multiple devices.
Power adaptors for retail, resale and project requirements
MAG GmbH has been supplying the retail, commercial and industrial sectors with cables, adaptors and accessories since 1992. DINIC is our own brand. Use the technical product data and the volume-based pricing shown for each product to assist with your procurement.
Do you need help choosing the right product or require a larger quantity? Please send us details of the required connectors, the quantity and the required delivery date. A photo of the existing connectors will help us match them correctly.