DINIC S-ATA 1, 2, 3 cable, straight S-ATA to 90° right-angled S-ATA, DINIC box with Euro hole, 0.50 m

Quick overview

Advantages

• Straight S-ATA 7-pin plug to S-ATA 7-pin plug with 90° right-angle bend
• 0.50 m cable length for internal data connections and organised cable management
• Angled connector reduces the installation space required on the connected device
• Suitable for SATA 1, SATA 2 and SATA 3 environments
• For motherboards, host controllers, RAID/HBA controllers, backplanes and SATA end devices

Product description

The DINIC SATA data cable, 0.50 m in length, connects devices with a 7-pin SATA data connector to a motherboard, host controller or backplane. One end of the cable features a straight 7-pin SATA connector, whilst the other end features a 7-pin SATA connector angled 90° to the right. The angled design facilitates cable routing where space is limited, such as in drive bays, backplanes and other compact installation scenarios. The internal data cable is designed for SATA 1, SATA 2 and SATA 3 environments.

Applications

• System integration and PC/industrial PC assembly
• Control cabinet and panel PC assemblies with limited installation space
• Server and storage maintenance and drive replacement
• Test set-ups and internal SATA cabling
• Structured internal cabling in IT systems

Technical Specifications

Compatibility

The cable is designed for devices with a 7-pin SATA data connector, including HDDs, SSDs and optical drives with a SATA data port.

On the host side, it can be connected to SATA data sockets on motherboards, RAID/HBA controllers and backplanes. The 7-pin SATA connector standard allows for use in SATA 1, SATA 2 and SATA 3 environments.

Note on angled connectors

With angled SATA connectors, the designation of the angle direction can be interpreted differently depending on the perspective. The product image is therefore authoritative for the specific orientation of the 90° connector.

Selection and practical guidance

Before installation, check that the right-angled connector orientation is compatible with the position of the SATA socket and the available installation space. The cable length of 0.50 m is suitable for internal connections where the motherboard or controller and the SATA peripheral are connected to each other within the system.

FAQ