German / Deutsch 
English 
French / Français 
Spanish / Español 
Dutch / Nederlands 
Italian / Italiano 
Polish / Polski 
Norwegian / Norsk 
Danish / Dansk 
Finnish / Suomi 
Swedish / Svenska 
Czech / Česky 
Greek / Ελληνικά 
Slovak / Slovenčina 
Slovenian / Slovenščina 
Estonian / Eesti 
Latvian / Latviešu 
Lithuanian / Lietuvių 
Hungarian / Magyar 
Romanian / Română 
Bulgarian / Български 
Portuguese / Português 
DINIC Cat.7 patch cable, S/FTP, RJ45 Cat.6A, 30 m, white, LSZH
Shielded Cat.7 copper patch cable for 10GBase-T with 600 MHz, PoE+ and halogen-free LSZH sheath.
Quick overview
2x RJ45 (8P8C), Cat.6A
Cat.7, tested up to 600 MHz
30.00 m
S/FTP, PiMF + braided screen
Copper (CU), AWG 26
LSZH, halogen-free
Advantages
- Cat.7 cable with a tested bandwidth of up to 600 MHz
- Supports 10GBase-T as well as 10/100/1000 BASE-T
- 2x RJ45 connectors (8P8C), Cat.6A-compliant, with tab protection
- S/FTP shielding with individually shielded wire pairs (PiMF) and additional braided shield
- AWG 26 copper inner conductors
- 50 µ gold-plated contact surfaces
- Suitable for PoE+ in accordance with IEEE 802.3at
- Halogen-free and low-smoke LSZH sheath
Product description
The DINIC Cat.7 patch cable (30 m) connects network components via two RJ45 connectors (8P8C). The RJ45 connectors comply with Cat.6A, whilst the Cat.7 cable used is tested up to 600 MHz. The cable supports 10GBase-T as well as the 10/100/1000 BASE-T Ethernet standards.
The S/FTP construction combines individually shielded wire pairs (PiMF) with an additional braided shield. The conductor material used is AWG 26 copper (CU). The contact surfaces of the RJ45 connectors feature 50 µ gold-plated pins.
The halogen-free, low-smoke LSZH sheath is suitable for professional network and building cabling. A slimline kink-protection sleeve with length markings, together with the latch tab protection, facilitates installation and identification in cases of dense port allocation.
Applications
- Structured network cabling in office and commercial premises
- Connections between patch panels, switches and other network components
- Server cabinets and data centre environments
- System integration, IT roll-outs and workstation connections
- Ethernet networks with PoE+ applications
Technical specifications
Compatibility
The patch cable is designed for network components with an RJ45 Ethernet interface (8P8C), including switches, routers, patch panels, servers, NAS systems, IP telephones and PoE+ capable devices. It supports 10/100/1000 BASE-T and 10GBase-T subject to the relevant installation conditions.
Selection and practical guidance
The cable length of 30.00 m is suitable for longer distances between network components. For a 10GBase-T connection, the connected network components and the rest of the transmission path must also support the required standard.
The length marking on the Slimline kink-protection sleeve facilitates identification during installation, maintenance and storage.
FAQ
The cable is fitted with RJ45 connectors (8P8C) in the Cat.6A standard at both ends.
Yes. The Cat.7 cable is tested up to 600 MHz and supports 10GBase-T as well as 10/100/1000 BASE-T.
The cable features S/FTP shielding. The wire pairs are individually shielded (PiMF) and additionally surrounded by a braided shield.
The cable is suitable for PoE+ in accordance with IEEE 802.3at.
The inner conductors are made of copper (CU) in AWG 26. The cable sheath is made of halogen-free and low-smoke LSZH material.
DINIC is a brand of MAG GmbH for cable and connection technology.
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|