German / Deutsch 
English 
French / Français 
Spanish / Español 
Dutch / Nederlands 
Italian / Italiano 
Polish / Polski 
Norwegian / Norsk 
Danish / Dansk 
Finnish / Suomi 
Swedish / Svenska 
Czech / Česky 
Greek / Ελληνικά 
Slovak / Slovenčina 
Slovenian / Slovenščina 
Estonian / Eesti 
Latvian / Latviešu 
Lithuanian / Lietuvių 
Hungarian / Magyar 
Romanian / Română 
Bulgarian / Български 
Portuguese / Português 
DINIC Cat.7 patch cable, S/FTP, LSZH, 1 m, white, 2× RJ45
Shielded Cat.7 premium patch cable with copper conductors, halogen-free LSZH sheath and Cat.6A-compliant RJ45 connectors.
Advantages
- Cat.7 cable, tested up to 600 MHz, for 10 Gigabit Ethernet
- S/FTP construction with PIMF twisted-pair shielding and additional braided shielding
- 100% copper conductor, AWG 26, with four paired wire pairs
- 2× Cat.6A-compliant RJ45 connectors with 50 µ gold-plated contact surfaces
- PoE+ compliant according to IEEE 802.3at
- Halogen-free LSZH sheath for reduced smoke emission
- Locking tab protection and slimline kink-protection sleeve with printed length marking
Product description
The DINIC Cat.7 patch cable, 1.00 m in length, connects network components via two RJ45 connectors. The cable is tested up to 600 MHz, supports 10 Gigabit Ethernet and is also suitable for 10/100/1000 BASE-T. The RJ45 connectors are Cat.6A-compliant.
The S/FTP cable construction combines individually metal-foil-shielded wire pairs (PIMF) with an additional overall braided shield. This makes the patch cable suitable for structured cabling systems and network environments where effective shielding against electromagnetic interference is required.
The eight conductors are made of 100% copper and are configured as four paired conductor pairs in AWG 26. The halogen-free LSZH sheath reduces smoke emission. The cable can be used with PoE+ in accordance with IEEE 802.3at to power suitable network devices.
Applications
- Connections between switches, servers and patch panels
- Server rooms and data centre environments
- Building and floor cabling in technical and distribution rooms
- IT/OT networks and cabling in areas subject to EMC interference
- System integration, roll-out and service cabling
- PoE+ applications such as Wi-Fi access points, IP telephones and suitable network cameras
Technical specifications
Compatibility
The patch cable is designed for network components and end devices with an RJ45 interface, such as switches, routers, patch panels, servers, NAS systems, as well as PCs and workstations.
It can be used in 10/100/1000 BASE-T and 10GBASE-T infrastructures. PoE+-capable devices compliant with IEEE 802.3at can also be connected via this cable.
Selection and practical guidance
The cable length of 1.00 m is particularly suitable for short connections between network components, for example between a switch and a patch panel or between active components within a server rack.
When planning, please note that the bare cable is Cat.7-rated and tested up to 600 MHz, whilst the fitted RJ45 connectors are Cat.6A-compliant. The length marking on the kink-protection sleeve facilitates identification during installation and servicing.
FAQ
The cable is fitted with a Cat.6A-compliant RJ45 connector at both ends.
The Cat.7 cable, tested up to 600 MHz, supports 10 Gigabit Ethernet as well as 10/100/1000 BASE-T.
Yes. The cable sheath is LSZH (Low Smoke Zero Halogen) and is therefore halogen-free.
Yes. The patch cable is suitable for PoE+ in accordance with IEEE 802.3at.
The eight wires are made of 100% copper and are configured as four twisted pairs in AWG 26.
DINIC is a trademark of MAG GmbH.
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|