Premium Cat.7 patch cable, LSZH, 2x RJ45 connectors, copper, white, 15.00 m

Quick overview

Advantages

• Suitable for 10 Gigabit Ethernet (10GBase-T) and backwards compatible with 10/100/1000BASE-T
• S/FTP construction with individually foil-shielded wire pairs and an overall braided shield
• LSZH outer sheath in a halogen-free version
• AWG 26 copper inner conductors
• Supports PoE+ in accordance with IEEE 802.3at
• RJ45 connector with latch-tab protection and slimline kink-protection sleeve
• Contact surfaces with 50 µ gold-plated pins

Product description

The DINIC Premium Cat.7 patch cable, 15.00 m in length, connects network components via two RJ45 connectors (8P8C). The cable is tested up to 600 MHz and designed for 10GBase-T as well as 10/100/1000BASE-T. This makes it suitable for professional copper network connections between switches, routers, patch panels and network interfaces.

The S/FTP cable construction combines foil-shielded twisted pairs (PiMF) with an additional braided overall shield. AWG 26 copper is used as the inner conductor. The white LSZH sheath is halogen-free and designed for installation environments where reduced smoke emission is a key consideration.

The RJ45 connectors feature a latch-type nose guard and slimline kink protection sleeves with length markings. The patch cable also supports PoE+ in accordance with IEEE 802.3at.

Applications

• Data centres and rack cabling
• Connections between patch panels, switches and network devices
• System integration and structured building cabling
• Industrial IT networks and control cabinet environments
• Office and campus networks up to 10GBase-T
• PoE+ connections, for example to access points, VoIP telephones and IP cameras

Technical specifications

Compatibility

The patch cable is designed for network devices and infrastructure with RJ45 sockets (8P8C), including switches, routers, patch panels and network interface cards.

It supports 10/100/1000BASE-T and 10GBase-T. The actual usable data rate also depends on the connected devices and the wider network infrastructure. PoE+ applications in accordance with IEEE 802.3at are supported.

Selection and practical guidance

For a 10GBase-T connection, not only the patch cable but also the active network components and the rest of the cabling infrastructure must be designed for the intended data rate.

The LSZH sheath is particularly recommended for installation environments where halogen-free cables and reduced smoke emission are required.

FAQ