German / Deutsch 
English 
French / Français 
Spanish / Español 
Dutch / Nederlands 
Italian / Italiano 
Polish / Polski 
Norwegian / Norsk 
Danish / Dansk 
Finnish / Suomi 
Swedish / Svenska 
Czech / Česky 
Greek / Ελληνικά 
Slovak / Slovenčina 
Slovenian / Slovenščina 
Estonian / Eesti 
Latvian / Latviešu 
Lithuanian / Lietuvių 
Hungarian / Magyar 
Romanian / Română 
Bulgarian / Български 
Portuguese / Português 
DINIC Premium Cat.7 patch cable, 2× RJ45 Cat.6A, S/FTP, LSZH, 5 m, blue
Shielded Cat.7 patch cable with copper inner conductors for 10GBASE-T network connections up to 600 MHz.
Quick overview
2× Cat.6A RJ45 plugs
Cat.7, S/FTP (PiMF)
5.00 m
LSZH, halogen-free
Copper, AWG 26
up to 600 MHz, 10GBASE-T
Advantages
- Cat.7 cable construction, tested up to 600 MHz and suitable for 10GBASE-T
- S/FTP shielding with pair-by-pair foil shielding (PiMF) and additional overall shield
- AWG 26 copper inner conductor
- 50 µ gold-plated contact surfaces on the RJ45 connectors
- LSZH sheath for installation areas requiring halogen-free cables
- PoE+ compatible in accordance with IEEE 802.3at
- Locking tab protection and slimline kink protection sleeves with printed length markings
Product description
The DINIC Cat.7 LSZH patch cable, 5 m in length, connects network components via two Cat.6A RJ45 connectors. The Cat.7 cable construction is tested up to 600 MHz and is suitable for 10GBASE-T connections as well as for 10/100/1000BASE-T networks.
The S/FTP shielding combines foil shielding of the individual wire pairs (PiMF) with an additional overall shield. The inner conductors are made of copper and are of AWG 26 gauge. The RJ45 connectors feature 50 µ gold-plated contact surfaces and are pin-assigned in accordance with EIA/TIA-568B.
The blue LSZH sheath is halogen-free. Latch tab protection and slimline kink protection sleeves facilitate handling when connecting to patch panels, switches and equipment. The cable length is marked directly on the kink protection sleeve.
Areas of application
- Structured network cabling in office and administrative buildings
- Patch panel and switch connections in server racks and equipment rooms
- Data centres and IT infrastructures with high port density
- Industrial networks and automation environments
- PoE+-enabled IP end devices such as access points, IP cameras or VoIP telephones
Technical specifications
Compatibility
Suitable for active and passive network components with an RJ45 interface, including switches, routers, patch panels and IP end devices. Supports network connections with 10/100/1000BASE-T and 10GBASE-T.
Selection and practical guidance
When planning a network link, in addition to the cable length, the available RJ45 interfaces and the required data rate must be taken into account. This cable is 5.00 m long, has two Cat.6A RJ45 connectors and supports 10GBASE-T. For PoE applications, it is certified to PoE+ in accordance with IEEE 802.3at.
FAQ
The cable is fitted with a Cat.6A RJ45 connector at both ends.
The length is 5.00 m. The length is also printed on the kink-protection sleeve.
Yes. The Cat.7 cable has been tested up to 600 MHz and is suitable for 10GBASE-T. It is also backwards compatible with 10/100/1000BASE-T.
The cable is certified for PoE+ in accordance with IEEE 802.3at.
The cable has an S/FTP construction with foil shielding of the individual wire pairs (PiMF) and an additional overall shield.
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|