German / Deutsch 
English 
French / Français 
Spanish / Español 
Dutch / Nederlands 
Italian / Italiano 
Polish / Polski 
Norwegian / Norsk 
Danish / Dansk 
Finnish / Suomi 
Swedish / Svenska 
Czech / Česky 
Greek / Ελληνικά 
Slovak / Slovenčina 
Slovenian / Slovenščina 
Estonian / Eesti 
Latvian / Latviešu 
Lithuanian / Lietuvių 
Hungarian / Magyar 
Romanian / Română 
Bulgarian / Български 
Portuguese / Português 
USB 2.0 mounting cable, 1 m, screw-in USB-A
The DINIC USB assembly cable USB-AA-MFS-1 connects a straight USB-A plug to a screw-on USB-A socket. With a cable length of 1 m, it is suitable for longer internal routing to a permanently mounted USB socket on a front panel, mounting bezel or equipment housing.
Quick overview
Advantages for device installation
- Screw-on socket for a fixed USB connection
- 1 m cable length for longer routing distances within the system
- Two pre-fitted fixing screws
Product description
The 1-metre version connects an existing USB-A port to an accessible connection point on the chassis or a rack panel. The socket is screwed into the designated mounting position; the straight plug is connected to the host system. The cable supports USB 2.0 and is backwards compatible with USB 1.1.
Applications
Equipment integration, custom enclosure construction, 19-inch systems and rack panels, control and automation systems, as well as audio and recording studio installations.
Technical data
Compatibility
For connection to a USB-A socket on the host system. The cable does not have an internal motherboard pin header. The achievable data rate is determined by the entire connection and the connected devices.
Selection and practical guidance
26 mm refers to the distance between the mounting centres, not the size of the housing cut-out. Ensure that the cut-out, wall thickness, installation depth and screw mounting are suited to the specific component. Take into account the actual cable route, ensure the cable is laid without tension, and allow sufficient space behind the socket.
Installation guide with diagrams
The guide explains mounting spacing, front panel installation and space requirements behind the USB socket. The diagrams are for guidance only; specific manufacturing dimensions must be checked against the product or an approved dimensional drawing.
Fitting USB mounting cables: dimensions, planning and installation diagramsFrequently asked questions about the USB mounting cable
Is 26 mm the width of the required cut-out?
No. This specification refers to the distance between the centres of the two mounting points. The shape and dimensions of the chassis cut-out must be tailored to fit the socket.
Does the cable fit directly onto an internal motherboard header?
The cable has a USB-A plug. It requires a suitable USB-A socket and is not designed for direct connection to a motherboard pin header.
Are fixing screws included?
Yes. Two screws are pre-fitted to the USB-A socket. Check that they are suitable for the wall thickness and mounting method of your assembly.
Is 1 m sufficient for installation?
The actual cable run from the USB-A port to the mounting socket is the determining factor. Take into account the routing behind the front panel and lay the cable without putting any strain on the plug or socket.
Do the screws also lock a plugged-in USB plug in place?
The screws secure the socket to the housing. This does not result in the USB plug inserted from the outside being locked in place.
DINIC is a trademark of MAG GmbH.
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|