USB 2.0 extension cable, A male to A female, UL 2725, 28 AWG/2C, 26 AWG/2C, grey, DINIC polybag, length 3.00 m

Key benefits

• USB Type A plug to USB Type A socket for extending existing USB connections
• 3.00 m cable length for additional reach at workstations, in installations and service environments
• UL 2725 cable construction with 28 AWG / 2C for data and 26 AWG / 2C for power supply
• Passive design without integrated signal amplification
• Item number and EAN for clear identification in purchasing, warehousing and stock management

Product description

The DINIC USB 2.0 extension cable extends a USB Type-A connection by 3.00 m. The cable is fitted with a USB Type A plug at one end and a USB Type A socket at the other. This allows existing USB connections to be extended where device interfaces are difficult to access or where additional cable length is required.

The cable construction complies with UL 2725. 28 AWG / 2C is used for the data pair and 26 AWG / 2C for the power conductors. The grey cable is passive and contains no signal amplification. It is uniquely identified for commercial procurement and warehousing by the item number USB-II-3V and the EAN 4032528010816.

Areas of application

• IT workstations and system integration
• USB peripherals, hubs and adapter cables
• Service and maintenance access points on PCs and industrial PCs
• KVM and operator workstations
• Media technology and conference room installations
• Test, measurement and temporary service set-ups

Technical Specifications

Compatibility

The USB extension cable is designed for USB Type-A connections. The USB-A plug connects to a USB-A socket; a compatible USB-A plug can be connected to the USB-A socket on the extension cable.

Typical applications include USB peripherals such as keyboards, mice, printers, scanners, USB hubs, dongles, and measurement and service adaptors. When planning, please bear in mind that this is a passive cable with no signal amplification.

Selection and practical guidance

Before installation, the plug type and required extension length should be checked. This model connects a USB Type A plug to a USB Type A socket and provides 3.00 m of additional cable length. As no active signal amplification is integrated, the total length of the USB cable run should be taken into account during planning.

FAQ on the DINIC USB 2.0 extension cable