Connection cable for fibre optic router, simplex, OS2, LC/APC 8° to SC/APC 8°, 20m
Simplex fibre optic connection cable OS2 with LC/APC 8° to SC/APC 8°, 2.0 mm LSZH sheath, white, length 20 m for fibre optic transfer points and router connections
Simplex connection cable OS2 with LC/APC 8° to SC/APC 8° for connecting fibre optic routers, ONT or CPE devices to SC/APC-based fibre optic transfer points. The length of 20 m enables clean routing between the subscriber junction box, patch panel and end device, even over longer distances, without having to use additional couplers or extensions.
At a glance
Fibre class
Singlemode OS2
Number of fibres
1 (simplex)
Cladding material
LSZH (Low Smoke Zero Halogen)
Connector side A
LC/APC 8°
Features of this version
- Fibre class: Singlemode OS2
- Number of fibres: 1 (simplex)
- Cladding material: LSZH (Low Smoke Zero Halogen)
- Connector side A: LC/APC 8°
- Simplex OS2 singlemode connection cable for fibre optic routers and transfer points
- Length 20 m for longer distances between fibre optic TA, patch panel and end device
Product description
The APC ferrules with 8° cut minimise back reflections and support stable, low-loss single-mode transmissions in the OS2 range. The combination of LC/APC connector on the router or device interface and SC/APC connector on the handover side corresponds to typical FTTH/FTTB scenarios with SC/APC subscriber outlets or handover panels.
The halogen-free LSZH jacket reduces smoke development and corrosive gases in the event of fire and is therefore suitable for use in building, office and IT infrastructure. The outer diameter of approx. 2.0 mm facilitates installation in cable ducts, empty conduits or behind wall sockets without impairing cable management in distribution cabinets or racks. The white sheath colour enables clear visual assignment of the router connection cable in the patch panel and in the cabling documentation.
Benefits for your application
For fibre-optic connections, check the specified connector type and the APC version of both mating connectors. Connector type and end-face polish are separate selection criteria.
The halogen-free or LSZH design should be considered when selecting materials. This alone does not imply any particular fire classification.
Areas of application
- Connection of fibre optic routers, ONT and CPE devices to SC/APC handover points
- FTTH and FTTB infrastructures in commercial, office and administration buildings
- Connections between fibre optic subscriber connection box, patch panel and end device with extended cable path
- Building technology, office IT, system integration and telecommunications distribution installations
Technical data
Part number
LWR-LCA-SCA-20
EAN CODE
4032528041988
Product type
Simplex fibre optic connection cable / patch cable for fibre optic routers
Fibre class
Singlemode OS2
Connector side A
LC/APC 8°
Connector side B
SC/APC 8°
Number of fibres
1 (simplex)
Length
20 m
Cladding material
LSZH (Low Smoke Zero Halogen)
Outer diameter
approx. 2.0 mm
colour
White colour
Weight approx.
approx. 0.086 kg per piece
Compatibility
Suitable for end devices and components with LC/APC socket (e.g. fibre optic routers, ONT, CPE) on one side and for fibre optic transfer points, subscriber outlets (TA) or patch panels with SC/APC socket on the other side.
Selection and practical guidance
For fibre-optic connections, check the specified connector type and the APC version of both mating connectors. Connector type and end-face polish are separate selection criteria.
The halogen-free or LSZH design should be considered when selecting materials. This alone does not imply any particular fire classification.
Choose the cable length for the actual route, including the installation allowance.
Project requirements or larger quantities? When contacting MAG, quote article number LWR-LCA-SCA-20, the quantity and your preferred delivery date.
Frequently asked questions
Which connections must match?
Suitable for end devices and components with LC/APC socket (e.g. fibre optic routers, ONT, CPE) on one side and for fibre optic transfer points, subscriber outlets (TA) or patch panels with SC/APC socket on the other side.
What specifications apply to “Fibre class”?
Fibre class: Singlemode OS2.
What specifications apply to “Number of fibres”?
Number of fibres: 1 (simplex).
What specifications apply to “Cladding material”?
Cladding material: LSZH (Low Smoke Zero Halogen).
What is the article number?
This version is listed under article number LWR-LCA-SCA-20. Use this number for enquiries, orders and repeat orders.
DINIC is a brand of MAG GmbH. Cables, adapters and accessories for retailers, businesses and industry.
Manufacturer:
MAG GmbH
Vechelder Str. 22
38268 Lengede
Note on custom-made products
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|
View details about custom-made products