German / Deutsch 
English 
French / Français 
Spanish / Español 
Dutch / Nederlands 
Italian / Italiano 
Polish / Polski 
Norwegian / Norsk 
Danish / Dansk 
Finnish / Suomi 
Swedish / Svenska 
Czech / Česky 
Greek / Ελληνικά 
Slovak / Slovenčina 
Slovenian / Slovenščina 
Estonian / Eesti 
Latvian / Latviešu 
Lithuanian / Lietuvių 
Hungarian / Magyar 
Romanian / Română 
Bulgarian / Български 
Portuguese / Português 
DINIC USB C+A Charger 20W – PD 3.0 + QC 3.0 – black
USB power supply with USB-C Power Delivery 3.0 and USB-A Quick Charge 3.0 for charging, service and IT workstations.
up to 20 W
Power Delivery 3.0
Quick Charge 3.0
100–240 V AC, 50/60 Hz
Advantages
- 2 charging ports: 1× USB-C with PD 3.0 and 1× USB-A with QC 3.0
- Up to 20 W output power in single-port mode
- Multiple output profiles at 5 V, 9 V and 12 V
- Parallel operation of both ports with a total of 5.0 V / 3.0 A or 15 W
- Wide-range input of 100–240 V AC for different mains voltages
- Standby power consumption of 0.05 W
Product description
The DINIC USB C+A 20W charger combines a USB-C port with Power Delivery 3.0 and a USB-A port with Quick Charge 3.0 in a compact power supply unit. It is designed for professional charging and service environments where different USB charging interfaces are used.
Depending on the negotiation with the connected device, output profiles of up to 19.8 W are available via the USB-C port. The USB-A port supports QC 3.0 profiles up to 19 W. When the USB-C and USB-A ports are used simultaneously, the charger provides a total of 5.0 V at 3.0 A, or 15 W.
The input supports 100–240 V AC at 50/60 Hz and a maximum of 0.40 A. This makes the power supply suitable for, amongst other things, rollout, staging, service and device management workstations.
Areas of application
- System integration as well as rollout and staging workstations
- IT and telecoms services, repair and test stations
- Office IT and conference technology
- Device management stations
- USB-powered mobile peripherals such as handhelds, scanners and measuring devices
- Service provision in technical rooms and similar installation environments
Technical specifications
Compatibility
USB-C: for devices with USB Power Delivery 3.0 via a suitable USB-C charging cable.
USB-A: for devices with Quick Charge-compatible USB charging via a suitable USB-A charging cable.
Typical device types include smartphones, tablets, handhelds, scanners and other mobile peripherals. The actual voltage and charging power used are determined by the respective device and charging profile.
Selection and practical guidance
To achieve the maximum charging power, the connected device must support the relevant charging protocol and output profile.
If USB-C and USB-A are used simultaneously, a total of 15 W at 5.0 V / 3.0 A is available. For applications with higher power requirements, the power required per connected device should therefore be checked in advance.
FAQ
The power supply has one USB-C port with Power Delivery 3.0 and one USB-A port with Quick Charge 3.0.
Depending on the negotiated PD 3.0 profile, the USB-C port provides up to 19.8 W at 9.0 V and 2.2 A.
When the USB-C and USB-A ports are used in parallel, the total power output is 15 W at 5.0 V and 3.0 A.
It is suitable for compatible smartphones, tablets, handheld devices, scanners and mobile peripherals with USB-C PD or QC-compatible USB charging.
The input is rated for 100–240 V AC at 50/60 Hz and a maximum of 0.40 A.
DINIC is a trademark of MAG GmbH.
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|