English 
French / Français 
Spanish / Español 
Dutch / Nederlands 
Italian / Italiano 
Polish / Polski 
Norwegian / Norsk 
Danish / Dansk 
Finnish / Suomi 
Swedish / Svenska 
Czech / Česky 
Greek / Ελληνικά 
Slovak / Slovenčina 
Slovenian / Slovenščina 
Estonian / Eesti 
Latvian / Latviešu 
Lithuanian / Lietuvių 
Hungarian / Magyar 
Romanian / Română 
Bulgarian / Български 
Portuguese / Português 
DINIC power cable for IT equipment, C13 90° upwards to C14 – 0.30 m, black, VDE
Short power extension lead with an upward-angled C13 plug for space-saving power connections.
Quick overview
Installation benefits
- Angled device connection: The C13 connector allows for space-saving cable routing with a shallow installation depth behind devices.
- Less excess cable length: The short 30 cm version is suitable for connections that are close together.
- Flexible connection cable: H05VV-F with PVC sheath and three conductors, including an earth conductor.
- Certified connectors: VDE and ENEC 10 markings are listed in the product data sheet.
Product description
The DINIC CB-K-D-03 IT cable connects an IEC 60320 C13 coupler, angled 90° upwards, to a straight C14 plug. The black, VDE-approved version, 0.30 m in length, is suitable for short power connections in IT racks, equipment cabinets and industrial equipment installations.
The angled connection facilitates cable routing along the rear of the equipment. The flexible H05VV-F cable comprises three conductors, each with a cross-sectional area of 0.75 mm². The required angle, the distance between the connectors and the electrical connection ratings are key factors in selecting the correct cable.
Approvals by target market
The VDE and ENEC 10 markings for the connectors used are documented in the technical drawing and the associated supporting documentation.
Areas of application
- Server and network cabinets with suitable PDU or UPS connections
- System integration and short power connections to industrial PCs
- AV and media technology with C14 equipment sockets
- Control and measurement devices in technical and control cabinets
Technical Specifications
Compatibility
The C13 socket fits onto a C14 appliance plug. The straight C14 plug is connected to a C13 socket or a C13 power outlet, for example on a PDU or UPS. Devices with suitable connectors and electrical ratings within the specified limits are suitable. In addition, the angled design must be suitable for the installation situation.
Practical note on the direction of the angle
Terms such as ‘right’, ‘left’, ‘top’ or ‘bottom’ can be interpreted differently depending on the perspective. The installation orientation of the device connection also affects the subsequent cable exit. When making your selection, therefore, always refer to the product illustration and compare it with your device connection and the desired cable routing.
Frequently asked questions
The C13 coupler is angled upwards by 90°. The C14 plug is straight. The product illustration is decisive for the orientation.
For short connections between adjacent sockets, for example in a rack or between an existing C13 supply cable and the device.
Yes, provided there is a C13 output and the electrical ratings match. The connected device requires a C14 input.
The rated values are 10 A and 250 V AC. An H05VV-F cable with a cross-section of 3G0.75 mm² is used.
The product is listed as a VDE-compliant version. The accompanying data sheet also documents the ENEC 10 marking of the connectors.
DINIC is a trademark of MAG GmbH.
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|