English 
French / Français 
Spanish / Español 
Dutch / Nederlands 
Italian / Italiano 
Polish / Polski 
Norwegian / Norsk 
Danish / Dansk 
Finnish / Suomi 
Swedish / Svenska 
Czech / Česky 
Greek / Ελληνικά 
Slovak / Slovenčina 
Slovenian / Slovenščina 
Estonian / Eesti 
Latvian / Latviešu 
Lithuanian / Lietuvių 
Hungarian / Magyar 
Romanian / Română 
Bulgarian / Български 
Portuguese / Português 
DINIC ITU cable, C13 90° downwards to C14 – 0.30 m, black, VDE
30 cm short IT equipment extension lead, C13 to C14, with a downward-angled C13 plug and VDE approval for space-saving power connections.
Quick overview
Installation benefits
- Angled appliance connection: The C13 connector allows for space-saving cable routing with a shallow installation depth behind appliances.
- Less excess cable length: 30 cm for short connections between closely spaced terminals.
- Flexible connection cable: H05VV-F with PVC sheath and three conductors, including an earth conductor.
- Certified connectors: VDE and ENEC 10 markings are shown in the technical drawing.
Product description
The DINIC CB-K-D2-03 IT cable connects an IEC 60320 C13 coupler, angled 90° downwards, to a straight C14 plug. The black, VDE-approved version, 0.30 m in length, is suitable for short power connections in IT racks, equipment cabinets and appliance installations.
The angled socket makes it easier to route the connection cable along the rear of the equipment. The flexible H05VV-F cable has three copper conductors, each with a cross-sectional area of 0.75 mm². The short version reduces excess cable length between the power distribution point and the equipment.
Approvals by target market
The technical drawing of the product shows the VDE and ENEC 10 markings on the connectors used.
Applications
- Server and network cabinets with suitable PDU or UPS connections
- Short power connections to servers, switches and storage systems
- AV and media technology with C14 equipment sockets
- System integration, IT services and equipment manufacturing
Technical Specifications
Compatibility
The C13 socket fits a C14 appliance plug. The straight C14 plug is connected to a C13 coupler or a C13 power outlet, for example on a PDU or UPS. This requires suitable electrical connection ratings within the specified nominal values and sufficient space for the angled design.
Practical note on the direction of the angle
Terms such as ‘right’, ‘left’, ‘top’ or ‘bottom’ can be interpreted differently depending on the perspective. The installation position of the equipment connection also influences the subsequent cable exit. When making your selection, therefore, always refer to the product illustration and compare it with your equipment connection and the desired cable routing.
Frequently asked questions
The C13 coupler is angled downwards by 90°. The C14 plug is straight. The product illustration is decisive for the orientation.
For short connections between adjacent sockets, for example in a rack or between an existing C13 supply cable and a device.
Yes, provided there is a suitable C13 output and the electrical ratings match. The connected device requires a C14 input.
The rated values are 10 A and 250 V AC. An H05VV-F cable with a cross-section of 3G0.75 mm² is used.
The product is listed as a VDE-compliant version. The technical drawing also documents the ENEC 10 marking of the connectors.
DINIC is a trademark of MAG GmbH.
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|