Patch cable Cat.6, flat, PiMF/STP, white, DINIC box with Euro hole, length 1m
Patch cable Cat.6 flat, PiMF/STP, 1.0 m, white - DINIC Box (RJ45 plug/plug)
The DINIC Cat.6 flat patch cable (PiMF/STP) is designed for professional RJ45/RJ45 connections in structured copper cabling. Thanks to the flat geometry (approx. 1.5 mm × 6.1 mm), the cable is particularly suitable for space-critical installations - e.g. behind skirting boards, under floor coverings, in flat parapet ducts or in furniture and technology routes.
At a glance
Shielding
PiMF/STP (wire pairs in foil + overall shield)
Conductor cross-section
AWG 36
Cable construction
Flat cable
Cable length
1,00 m
Features of this version
- Shielding: PiMF/STP (wire pairs in foil + overall shield)
- Conductor cross-section: AWG 36
- Cable construction: Flat cable
- Length: 1.00 m
- 2× RJ45 plugs (8P8C), gold-plated contacts for stable signal transmission
- Category Cat.6 - designed for 10/100/1000BASE-T (Gigabit Ethernet)
Product description
The shielded design (PiMF/STP) supports low-interference data transmission in environments with electromagnetic influences. Gold-plated contacts and moulded bend protection with strain relief increase the operational reliability of patch panels, switch ports and end devices.
Note for planning/PoE: Due to the very slim conductor design (AWG 36), flat patch cables are typically designed for data patching; for PoE loads in permanently loaded routes, suitable PoE-capable patch cables with a larger conductor cross-section are preferable.
Areas of application
- Workplace and patch panel cabling (office IT, specialised trade, system integration)
- Connections Switch ↔ patch panel ↔ router ↔ end device
- Building technology and meeting room installations with flat cable paths
- Network connections close to control cabinets and technical furniture with limited installation space
Technical data
Article number
C6-F1-KB
EAN CODE
4032528038582
Category
Cat.6
Plug connector
RJ45 plug ↔ RJ45 plug (8P8C)
Contact surface
gold-plated
Shielding
PiMF/STP (wire pairs in foil + overall shield)
Conductor cross-section
AWG 36
Cable construction
Flat cable
Outer dimension (OD)
approx. 1.5 mm × 6.1 mm
Cable length
1,00 m
colour
white colour
Kink protection / strain relief
moulded, with strain relief
Packaging
DINIC box (with Euro hole)
Compatibility
For devices/components with RJ45 socket (8P8C), e.g. switches, routers, patch panels, network sockets, servers, PCs, VoIP telephones and IP-capable peripherals in structured copper cabling (Cat.6 environment).
Selection and practical guidance
Compare the specified connections, design and technical data with your installation.
Choose the cable length for the actual route, including the installation allowance.
Project requirements or larger quantities? When contacting MAG, quote article number C6-F1-KB, the quantity and your preferred delivery date.
Frequently asked questions
Which connections must match?
For devices/components with RJ45 socket (8P8C), e.g. switches, routers, patch panels, network sockets, servers, PCs, VoIP telephones and IP-capable peripherals in structured copper cabling (Cat.6 environment).
What specifications apply to “Shielding”?
Shielding: PiMF/STP (wire pairs in foil + overall shield).
What specifications apply to “Conductor cross-section”?
Conductor cross-section: AWG 36.
What specifications apply to “Cable construction”?
Cable construction: Flat cable.
What is the article number?
This version is listed under article number C6-F1-KB. Use this number for enquiries, orders and repeat orders.
DINIC is a brand of MAG GmbH. Cables, adapters and accessories for retailers, businesses and industry.
Manufacturer:
MAG GmbH
Vechelder Str. 22
38268 Lengede
Note on custom-made products
 |
Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.
|
View details about custom-made products