»
»
»
»
SAT coaxial cable 2x F-connector, 120dB, gold-plated connections, quadruple shielded, white, DINIC box with Euro hole, length 2.50m
SAT coaxial cable 2x F-connector, 120dB, gold-plated connections, quadruple shielded, white, DINIC box with Euro hole, length 2.50m
SAT coaxial cable 2× F-connector, 120 dB, 2.5 m - DINIC box, gold-plated connectors, 4-fold shielded, white
Pre-assembled 75-ohm coaxial connection cable (type 3C2V) for low-interference RF signal transmission in SAT/IF installations.
Technical highlights
- F plug on both sides (F plug ↔ F plug), gold-plated contact surfaces for stable contacting
- Shielding attenuation: 120 dB - 4-fold shielding (Al foil + Al-Mg braiding) to reduce interference/radiation
- Inner conductor: 0.5 mm CCS; insulation: 2.9 mm foam PE
- Outer diameter: 6.0 mm - compact and easy to lay in dense installation environments
- Shielding structure: Al foil / 128×0.12 Al-Mg braid / Al foil / 96×0.12 Al-Mg braid
- Colour: white; length: 2.5 m - suitable for patch/bridge sections at the transfer point and in the distributor
- Packaging: DINIC box with Euro hole - suitable for storage and counters
Cable description
This pre-assembled SAT coaxial cable is designed for the reliable connection of HF components with an F interface. The 4-fold shielding structure (foil/braid) achieves 120 dB shielding attenuation and supports low-interference signal routing - especially in environments with high electromagnetic interference (e.g. technical rooms, duct routes, densely occupied distribution panels).
The construction with 0.5 mm CCS inner conductor, foam PE dielectric and 6.0 mm outer diameter combines defined electrical properties with practical handling. Gold-plated F connectors improve contact stability at frequently mated transitions and support a reproducible connection in professional operation.
Areas of application
- SAT/IF cabling between LNB, multi-switch, SAT receiver and SAT-compatible distribution components
- Building technology and residential/commercial units: Patch/bridge connections in the media distributor
- System integration in TV/radio distribution systems (transitions, measuring/service points)
- HF peripherals close to the control cabinet, technical rooms and structured cable routes
Technical data
| Product type |
SAT coaxial connection cable (type 3C2V) |
| Connection A |
F connector (gold-plated contact surfaces) |
| Connection B |
F plug (gold-plated contact surfaces) |
| Length |
2,5 m |
| Colour |
White colour |
| Shielding attenuation |
120 dB |
| Shielding |
4-fold: Al foil / 128×0.12 Al-Mg braid / Al foil / 96×0.12 Al-Mg braid |
| Inner conductor |
0.5 mm CCS |
| Insulation (dielectric) |
2.9 mm foam PE |
| Outer diameter |
6.0 mm |
| Packaging |
DINIC box with Euro hole |
| EAN CODE |
4032528038858 |
| Article number |
SAT-FF2-5W-KB |
Compatibility
Suitable for devices/components with F socket, e.g. LNB, multiswitches, SAT receivers, SAT IP/tuner modules, antenna sockets with F connection as well as F connectors and F adapters.
Scope of delivery
- 1× SAT coaxial cable F plug ↔ F plug, 2.5 m, white
- 1× DINIC box (individual packaging)
DINIC is a brand of MAG GmbH (professional cable and adapter programme for installation and system integration).
SEO: SAT coaxial cable 2.5m F-connector/F-connector 120dB quadruple shielded gold-plated white DINIC Box
Manufacturer:
MAG GmbH
Vechelder Str. 22
38268 Lengede
Email: dinic@mag.de
Safety Information:
Use only under direct adult supervision
.webp "SAT coaxial cable 2x F-connector, 120dB, gold-plated connections, quadruple shielded, white, DINIC box with Euro hole, length 2.50m")
.webp "Preview: SAT coaxial cable 2x F-connector, 120dB, gold-plated connections, quadruple shielded, white, DINIC box with Euro hole, length 2.50m")
.jpg "SAT coaxial cable 2x F-connector, 120dB, gold-plated connections, quadruple shielded, white, DINIC box with Euro hole, length 2.50m")
