-
You do not have any products in your shopping cart yet.
Main page
»
Products
»
Electricity
»
National mains cable
»
2-pin mains cable C7 and C17 black
»
Power cable C8 to C7 extension, 0.75mm², VDE, black, length 2.00m
.webp "Power cable C8 to C7 extension, 0.75mm², VDE, black, length 2.00m")
.webp "Preview: Power cable C8 to C7 extension, 0.75mm², VDE, black, length 2.00m")
Power cable C8 to C7 extension, 0.75mm², VDE, black, length 2.00m
.png "Power cable C8 to C7 extension, 0.75mm², VDE, black, length 2.00m")
Mains cable IEC 60320 C8 (plug) to C7 (coupling), 2.00 m, 2x 0.75 mm², black
2-pole device extension for C7/C8 connections with PVC flat cable (H03VVH2-F) in professional installation environments.
Technical highlights
- Plug connector: IEC 60320 C8 (2-pin plug, without earthing contact) to IEC 60320 C7 (coupling)
- Conductor construction: 2-core, 2x 0.75 mm² (H03VVH2-F), finely stranded copper conductors
- Insulation/sheathing: PVC insulation and PVC outer sheath; flat cable geometry for clean installation
- Electrical rating: up to 250 V / 2.5 A (plug connector), cable rating 300 V
- Temperature behaviour (PVC cable): tested including cold bending test at -15 °C; rated operation up to 70 °C (on the cable side)
- Length: 2.00 m
- Colour: black
- Packaging: Bulk (without individual packaging), suitable for project and series requirements
Description: black
This device extension connects an IEC 60320 C7 connector via an IEC 60320 C8 connector and thus enables range adaptation in existing C7/C8 power paths. Typical application is the extension of "Figure-8" connection cables when power supply units, AV or IT devices are mounted remotely.
The design as a PVC flat cable (H03VVH2-F, 2x 0.75 mm²) supports space-saving, low-twist installation along cable routes, in cable ducts or behind device installations. The finely stranded copper conductors are designed for flexible installation and repeated handling during servicing.
For standardised installations, the connector side is designed for 2-pole applications without protective earth conductor (C7/C8). VDE/ENEC-tested design for professional procurement and approval processes.
Areas of application
- System integration and device cabling (IT peripherals, AV components, power supply units)
- Office IT, technical rooms, data centre peripheral areas (C7/C8 consumers)
- Service/field installations for range adjustment of connection cables
- Device installation in racks/media furniture and behind installations with limited installation paths
Technical data
| Article number | CB-8-C8 |
| EAN CODE | 4032528032146 |
| Interface | IEC 60320 C8 (male) to IEC 60320 C7 (female) |
| Number of poles | 2-pole, without earthing contact |
| Conductor cross-section | 2x 0.75 mm² |
| Cable type | H03VVH2-F (PVC flat cable) |
| Conductor material | Copper, finely stranded |
| Sheath/insulation | PVC / PVC |
| Nominal values (plug connector) | up to 250 V / 2.5 A |
| Cable design | 300 V, 70 °C (line side) |
| colour | Black colour |
| Cable length | 2,00 m |
| Packaging | Bulk (without) |
| weight | approx. 0.09 kg / piece |
Compatibility
- For devices with IEC 60320 C8 device installation socket (Figure-8)
- As an extension between existing IEC 60320 C7/C8 connections (C7 plug to C8 plug, then C7 to device)
- Typical device classes: Power supply units, audio/video components, small devices in IT and media technology with C8 inlet
Scope of delivery
1x power cable/extension IEC 60320 C8 (plug) to IEC 60320 C7 (coupling), length 2.00 m, black, bulk.
DINIC is a trademark of MAG GmbH. Technical design for use in trade, commerce and industry.
SEO: IEC 60320 C8 to C7 mains cable extension 2m 0.75mm² H03VVH2-F PVC black DINIC
Manufacturer:
MAG GmbH
Vechelder Str. 22
38268 Lengede
Email: dinic@mag.de
Use only under direct adult supervision