Main page » Products » Electricity » International mains cable » Mains cable Australia OFF

Mains cable Australia OFF

In the Australian (AUS) power cable category, specialist retailers, system houses, installers and industrial and commercial customers can find pre-assembled DINIC power cables with Australian type I plugs. The cables are generally designed as H05VV-F and are available in practical lengths of approx. 1.8 m to 5 m.

MAG GmbH offers high-quality DINIC connection cables with various appliance plugs such as C7 (2-pin appliance plug), C5 (Mickey Mouse plug) and C13 (IEC appliance plug, straight or 90° angled) as well as additional IEC appliance extensions with C13/C14. All variants are SAA-certified and therefore optimally prepared for use in the Australian market.

Advantages and typical applications of DINIC power cables Australia (AUS)

Your advantages at a glance

SAA-certified DINIC power cables with type I plugs especially for the Australian market.
Choice of C7, C5 and C13 appliance plugs - straight or 90° angled for space-critical installations.
Various cross-sections (e.g. 3 x 0.75 mm² and 3 x 1.0 mm²) for different power requirements.
Robust PVC sheathed cables (H05VV-F) in an industrial black finish.
Pre-assembled lengths from approx. 1.8 m to 5 m for flexible device supply cables and rack installations.
Supplementary C13-C14 IEC extensions with multi-approvals (including SAA) for international setups.

Typical applications Power cables Australia (AUS)

Power supply for IT equipment and office electronics with C13 IEC connection in Australia.
Connection of notebooks, docking stations and power supply units with C5 device plug (Mickey Mouse).
Power supply for compact consumer and small appliances with C7 connection cables (e.g. audio, video and household appliances).
Rack and control cabinet insert with 90° angled C13 plugs to relieve cable management.
International project and series equipment requiring SAA-certified power cables for export to Australia.

Select the appropriate DINIC power cables Australia (AUS) according to conductor cross-section, cable length, connector combination (type I to C7, C5 or C13, straight or angled), certifications and desired packaging units.

1 to 12 (from a total of 12)

Australian power cables and plugs: quality products to the highest standards and approvals

Australian power cords and plugs differ from those of other countries and must meet certain standards and approvals in order to be used in Australia. Here you will find some basic information about Australian power cords, plugs and approvals:

Plugs: In Australia, the Type I plug is used, which has three flat pins (two angled pins for the active and neutral wires and a vertical pin for earthing). These plugs are designed for a rated voltage of 230 V and a rated current of 10 A. Cables: The most commonly used cable types for Australian mains cables are H05VV-F and H05RR-F. These cables comply with the Australian standards AS/NZS 3191 and AS/NZS 3112. approvals: Mains cables and plugs sold in Australia must fulfil the requirements of the Australian Communications and Media Authority (ACMA). This includes compliance with AS/NZS 3112 and AS/NZS 3191 standards.

It goes without saying that our power cords fulfil these requirements.