USB 2.0 mounting cable A male to A female, 1m A female screw-on, incl. 2 screws distance 26mm

• USB 2.0 mounting/extension cable: USB-A plug (straight) to USB-A socket (screw-on)
• Data rate up to 480 Mbit/s (USB 2.0), downward compatible with USB 1.1
• Permanently mountable USB-A socket with 26 mm screw spacing (for front plate/panel)
• Conductor structure: 28 AWG/1P (data pair) + 24 AWG/2C (power supply)
• Twisted pair data cables for improved signal quality
• Cable length: 1 m - suitable for clean conversion from internal to external USB connection points
• Supplied with 2 pre-assembled screws for quick installation

This DINIC USB mounting cable provides a robust, mechanically relieved USB connection point: A straight USB-A plug is routed to the internal/side USB-A interface of a system, while the USB-A socket can be permanently fixed in a front panel, a housing cut-out or a carrier panel via two screw points. This creates a reproducible, service-friendly USB "built-in socket" for recurring mating cycles in a professional environment.

The conductor structure with 28 AWG/1P for the data pair and 24 AWG/2C for the power supply as well as twisted pair data lines supports stable transmission in accordance with USB 2.0 up to 480 Mbit/s and is compatible with USB 1.1. The fixed mounting of the socket reduces tensile forces on the device interface and facilitates standard-compliant, tidy integration into systems and racks.

• 19" systems and rack panels (service USB on the front of the device)
• Control cabinet construction, control and automation systems (operating/service interfaces)
• Medical technology device integration (permanently defined USB access points on the housing)
• Vehicle/cockpit superstructures, mobile systems (mechanically stable connection routing)
• Audio/recording studio installations (front connections for interfaces, controllers, dongles)
• System integration and special housing construction (panel-mount USB in housings/carrier plates)

• For devices/ports with USB-A socket (host/hub/PC) to create a permanently installed USB-A connection point
• Suitable for USB 2.0 applications, compatible with USB 1.1 (supported data rate depends on end devices/system)

• 1× USB 2.0 mounting cable, USB-A plug to USB-A socket, length 1 m
• 2× pre-assembled screws (for fastening the USB-A socket)

Manufacturer:
MAG GmbH
Vechelder Str. 22 
38268 Lengede
Email: dinic@mag.de

Note on custom-made products

Do you require this product in a different length, colour or with different connectors? Find out more about customised products in our shop.

View details about custom-made products